Looking for new replacements!  Hard to find. 

When I measure my DT125A pegs, they look the same size.  Does anyone know if the 125 and 360 rubber pegs are the same or will work?  Better yet, any idea who sells the ones for the 360?

thanks.

Hello, if you plan on riding offroad ditch the rubber pegs, horrible in wet conditions.. I put on 73-74 MX250-360, SC500 metal pegs. I sure you could find some aftermarket ones, but some are cheap and easily break.

thanks I'll give those a look over.

I'll confuse the issue but on my DT1 i used original rubbers motocrossing through the early years with no problem.
But anyway--part number randomly going DT125A & DT3 they look the same but number changes by the last middle number.
Both 214 numbers which to me relates to DT1. DT125a shows 214-27411-00. DT3 shows 214-27413-00--on Partzilla.
Have a happy day.

Partzilla shows the same footpeg rubbers fitting a lot of the 74-76 DT models... 

You might try contacting Clauss Studios if you haven't already.  They might be your best bet.  HVC Cycle would be another place I'd check.
 

Not sure if it's any help but Partzilla shows them in stock for a DT3 @$14.47. I guess that's each!!.

MarkT, thanks for the Clauss Studios reference. I ordered a pair from them. RT325, thanx for the part # analysis.