×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Bassani exhaust pipe
- Dennis D
- Topic Author
- Offline
- Elite Member
- Posts: 198
- Likes received: 69
Bassani exhaust pipe was created by Dennis D
Anyone running a Bassani pipe on their 71-73 CT that could send me a picture of the mounting?
22 Mar 2024 12:07
#1
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Offline
- Site Supporter
- Posts: 4016
- Likes received: 1952
Replied by Gr8uncleal on topic Bassani exhaust pipe
I don't have any photos of the one that was fitted to my own 1971 CT1C when I bought the bike, bit it was mounted to the top shock absorber bolt.
If you have a 1972 (CT2) or 1973 (CT3) bike, I think you'll need the special CT1 top shock absorber bolt to enable you to fit it.
Edit - the special bolt is the longer of the one shown in the photos in this link (I sold the parts a while back).
Yamaha top shock mount bolt AT1 CT1 248-22241 90116-10116 261-22242 90116-10115 | eBay
If you have a 1972 (CT2) or 1973 (CT3) bike, I think you'll need the special CT1 top shock absorber bolt to enable you to fit it.
Edit - the special bolt is the longer of the one shown in the photos in this link (I sold the parts a while back).
Yamaha top shock mount bolt AT1 CT1 248-22241 90116-10116 261-22242 90116-10115 | eBay
Please Log in or Create an account to join the conversation.
- Schu
- Offline
- Site Supporter
- Posts: 1331
- Likes received: 1569
Replied by Schu on topic Bassani exhaust pipe
This isn’t a CT, but it is a Bassani mounted on my DT125B. If you zoom in you will see that I had to buy a universal muffler bracket to fit the outlet diameter. Then I used a Yamaha rubber insulated exhaust hanger that I had in my spare parts bin.
imgur.com/a/LTKu2GL
imgur.com/a/R23YFJL
imgur.com/a/LTKu2GL
imgur.com/a/R23YFJL
Schu
CT1B, CT1C, JT1, JT2, DT360A, GT80B, DT100B, DT125B,
DT175B, DT175C, DT250B, DT400B, Z50, SCR950
Someday, you'll own some Yamahas
CT1B, CT1C, JT1, JT2, DT360A, GT80B, DT100B, DT125B,
DT175B, DT175C, DT250B, DT400B, Z50, SCR950
Someday, you'll own some Yamahas
Please Log in or Create an account to join the conversation.
- Dennis D
- Topic Author
- Offline
- Elite Member
- Posts: 198
- Likes received: 69
Replied by Dennis D on topic Bassani exhaust pipe
Thanks for the pic. Header on the pipe I have is quite a bit different.
I may have to fab something up to make it fit. Understand about the
bolt as I am going to put one on a 71 CT and another on a 73 CT. Does
that exhaust on your bike set lower that the stock pipe did? Hard to tell
from the angle.
I may have to fab something up to make it fit. Understand about the
bolt as I am going to put one on a 71 CT and another on a 73 CT. Does
that exhaust on your bike set lower that the stock pipe did? Hard to tell
from the angle.
22 Mar 2024 13:07
#4
Please Log in or Create an account to join the conversation.
- Schu
- Offline
- Site Supporter
- Posts: 1331
- Likes received: 1569
Replied by Schu on topic Bassani exhaust pipe
Yes it does sit lower. I actually made up a filler panel to block off the view between the top of the pipe and the bottom of the seat because you could see into the void under the seat and I just didn’t like it.
imgur.com/a/U3yBIwB
oops. Wrong link first time.
imgur.com/a/U3yBIwB
oops. Wrong link first time.
Schu
CT1B, CT1C, JT1, JT2, DT360A, GT80B, DT100B, DT125B,
DT175B, DT175C, DT250B, DT400B, Z50, SCR950
Someday, you'll own some Yamahas
CT1B, CT1C, JT1, JT2, DT360A, GT80B, DT100B, DT125B,
DT175B, DT175C, DT250B, DT400B, Z50, SCR950
Someday, you'll own some Yamahas
Please Log in or Create an account to join the conversation.
- Dennis D
- Topic Author
- Offline
- Elite Member
- Posts: 198
- Likes received: 69
Replied by Dennis D on topic Bassani exhaust pipe
LOL! Someone who is as anal as I am it seems.
I think I might use the header off of a Yamaha pipe
that I have and get it to sit where I want it to. This
pipe supposedly came off of a AT3, but it crashes
into everything. I am going to run it and keep my
rear turn signals!
I think I might use the header off of a Yamaha pipe
that I have and get it to sit where I want it to. This
pipe supposedly came off of a AT3, but it crashes
into everything. I am going to run it and keep my
rear turn signals!
The following user(s) Liked this Post: Schu
22 Mar 2024 13:32
#6
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart