×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Baffle and End pipe
- StiLfun
- Topic Author
- Offline
- Site Supporter
- Posts: 22
- Likes received: 7
Baffle and End pipe was created by StiLfun
Well, finally finished CT’s baffle and end pipe. I Made them out of copper pipe / fittings from Lowe’s. Don’t have a welder butt can solder, And Some other little things that aren’t shown in pictures to beef them up. Couple of pictures.
The following user(s) Liked this Post: Enduronut, MarkT, Badger52, KJB, JayB
18 Apr 2020 20:33
#1
This message has an attachment image.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13513
- Likes received: 9366
Replied by MarkT on topic Baffle and End pipe
Nice work!
Those parts are often missing as you know so great that you figured out how to make your own!
Those parts are often missing as you know so great that you figured out how to make your own!
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
18 Apr 2020 20:51
#2
Please Log in or Create an account to join the conversation.
- mdscott
- Offline
- Site Supporter
- Posts: 2141
- Likes received: 1413
Replied by mdscott on topic Baffle and End pipe
That's cool, nice job.
Just don't run the engine to lean, you want to keep the solder from melting, somewhere around 375-deg F.
Just don't run the engine to lean, you want to keep the solder from melting, somewhere around 375-deg F.
Thanks Mark
Roseville, Ca.
'03 ST1300
'75 Norton
'73 CB500K
'81 Honda CT110
'87 PW50
'64 McClane Edger
'02 Honda XR70R
Roseville, Ca.
'03 ST1300
'75 Norton
'73 CB500K
'81 Honda CT110
'87 PW50
'64 McClane Edger
'02 Honda XR70R
18 Apr 2020 20:57
#3
Please Log in or Create an account to join the conversation.
- Enduronut
- Offline
- Founder Moderator
- Posts: 915
- Likes received: 1252
Replied by Enduronut on topic Baffle and End pipe
.
I'm going to add this blue-print to the thread, just in case someone wants the specs to make their own . . .
You might need a magnifying glass to read it!
.
I'm going to add this blue-print to the thread, just in case someone wants the specs to make their own . . .
You might need a magnifying glass to read it!
.
Control your thoughts . . . or your thoughts will control you!.!
Don't aim . . . and you'll hit your target every time!
A wise man knows . . . he isn't!
Failure squared . . . equals success!
Don't aim . . . and you'll hit your target every time!
A wise man knows . . . he isn't!
Failure squared . . . equals success!
The following user(s) Liked this Post: Rick C., MarkT, Swoop56, Badger52, JayB
This message has an attachment image.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart