×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
clutch o rings
- maxx2395
- Topic Author
- Offline
- Senior Member
- Posts: 33
- Likes received: 7
clutch o rings was created by maxx2395
HI ALL
I have an at2 I am assembling, I am trying to assemble,
The clutch, the O rings under the friction plates wont
fit under them, are they required or can I leave them out ?
Thanks for your time.
Maxx . . . . .
I have an at2 I am assembling, I am trying to assemble,
The clutch, the O rings under the friction plates wont
fit under them, are they required or can I leave them out ?
Thanks for your time.
Maxx . . . . .
24 Jun 2022 13:34
#1
Please Log in or Create an account to join the conversation.
- MarkT
- Away
- Site Supporter
- Posts: 13493
- Likes received: 9346
Replied by MarkT on topic clutch o rings
1. They don't fit "under" which could be your problem
2. Many of us leave them out.
2. Many of us leave them out.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
24 Jun 2022 13:42
#2
Please Log in or Create an account to join the conversation.
- RT325
- Offline
- Platinum Member
- Posts: 9711
- Likes received: 3966
Replied by RT325 on topic clutch o rings
Leave them out. Are you using aftermarket 'new' fibers that have less clearance under them. Don't worry.
The following user(s) Liked this Post: maxx2395
Please Log in or Create an account to join the conversation.
- maxx2395
- Topic Author
- Offline
- Senior Member
- Posts: 33
- Likes received: 7
Replied by maxx2395 on topic clutch o rings
Thanks for the replys everyone, yes I am using barnett fibers,
so I will leave them out. slowly getting it together.
have a good ride everyone.
Maxx . . . . .
so I will leave them out. slowly getting it together.
have a good ride everyone.
Maxx . . . . .
26 Jun 2022 11:15
#4
Please Log in or Create an account to join the conversation.
- maxx2395
- Topic Author
- Offline
- Senior Member
- Posts: 33
- Likes received: 7
Replied by maxx2395 on topic clutch o rings
HI
just want to thank markt and rt325 for the help
went together perfect, slowly getting together.
Maxx . . . . .
just want to thank markt and rt325 for the help
went together perfect, slowly getting together.
Maxx . . . . .
The following user(s) Liked this Post: MarkT, RT325, AirborneSilva
29 Jun 2022 11:34
#5
Please Log in or Create an account to join the conversation.
- maxx2395
- Topic Author
- Offline
- Senior Member
- Posts: 33
- Likes received: 7
Replied by maxx2395 on topic clutch o rings
HI Everyone
Now that you helped me out with the clutch rubber o rings,
I have assembled the clutch, the clutch primary drive gear
and the primary driven gear on the clutch basket do not line up ?
the drive gear is in the correct place but the driven gear looks like it is out about one eighth of an inch ? I am sure I assembled it correctly, has anybody
ever seen this ?
any help would be appreciated.
Maxx . . . . .
Now that you helped me out with the clutch rubber o rings,
I have assembled the clutch, the clutch primary drive gear
and the primary driven gear on the clutch basket do not line up ?
the drive gear is in the correct place but the driven gear looks like it is out about one eighth of an inch ? I am sure I assembled it correctly, has anybody
ever seen this ?
any help would be appreciated.
Maxx . . . . .
29 Jun 2022 21:44
#6
Please Log in or Create an account to join the conversation.
- Ht1kid
- Offline
- Site Supporter
- Posts: 1382
- Likes received: 815
Replied by Ht1kid on topic clutch o rings
Post a picture so we can see what you got
The following user(s) Liked this Post: MarkT
29 Jun 2022 22:43
#7
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart