facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Does this bearing look correct for the DT360?

  • pabdt
  • pabdt's Avatar Topic Author
  • Online
  • Platinum Member
  • Platinum Member
  • Posts: 798
  • Likes received: 583

Does this bearing look correct for the DT360? was created by pabdt

Ebay Link.   All I'm using from this kit is the bearing.  Enduronut has sent me a piston/pin/clips so I know those are correct.  Thanks E.   


   


 

════════════════════════════
1969 Yamaha CT1 175
1974 Yamaha DT125A
1974 Yamaha DT360A with SP96 Exhaust
Next…196x-197x Yamaha something.
30 Jun 2026 12:46 #1

Please Log in or Create an account to join the conversation.

  • Posts: 546
  • Likes received: 713

Replied by SKYDANCER46 on topic Does this bearing look correct for the DT360?

His listing says it does. Best thing to do is send the seller a message with the same question. He will know. 
1968 DT1 250, 1969 AT1 125, 1969 CT1 175, 1970 RT1 360
30 Jun 2026 13:07 #2

Please Log in or Create an account to join the conversation.

  • Posts: 11034
  • Likes received: 4854

Replied by RT325 on topic Does this bearing look correct for the DT360?

Does it sit good between the gudgeon posses in your piston. Are you just looking--not bought yet. Might be just me but id expect a bit more overhang at the ends for a 360 piston unless the piston is cast to allow for one bearing fits all--250 & 360, but don't think that's the case.
Last edit: 30 Jun 2026 13:59 by RT325.
30 Jun 2026 13:56 #3

Please Log in or Create an account to join the conversation.

  • Posts: 14895
  • Likes received: 11205

Replied by MarkT on topic Does this bearing look correct for the DT360?

I have an old "paper" parts list that shows the 1974 DT360 upper rod bearing as 93310-21854 which supersedes to 93310-218A6-00 and is still available.  (Keeping in mind sometime Yamaha had mistakes, Enduronut would know)

www.partzilla.com/product/yamaha/93310-2...n_sku=93310-21854-00

Same as the upper bearing for the earlier models listed in Buzzard's ebay ad.  I'd buy an OEM bearing rather than his kit.  
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
30 Jun 2026 16:31 #4

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart