facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

'74 dt360a carb

  • Posts: 1726
  • Likes received: 2154

Replied by Schu on topic '74 dt360a carb

I believe I still have a DT360A carb body that I ruined while trying to drill out a jet that was all chewed up and couldn’t be removed…….

You can have the tiny pin if I can come up with a way to remove it. Let me know and I will give it a go.
Schu

CT1B, CT1C, JT1, JT2, CT2, RT3, DT360A, GT80B, DT100B, DT125B, DT175B, DT175C, DT250B, DT400B, Z50

Someday, you'll own some Yamahas
23 Mar 2026 14:04 #11

Please Log in or Create an account to join the conversation.

  • Patdt360a
  • Patdt360a's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 29
  • Likes received: 4

Replied by Patdt360a on topic '74 dt360a carb

Hey Shu, nice to chat with you again.  Your offer is greatly appreciated but I found a little screw, filed it down to fit, and put Loctite on it and right now seems to be working.  I was able to tighten the jet setter down without the baffle turning.  I'll keep your kind offer in mind.  I think you could just push that out with a tool with a hooked point.

Best, Pat
The following user(s) Liked this Post: MarkT, Schu
23 Mar 2026 14:14 #12

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart