×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Foot Peg Rubbers 74 360
- pabdt
-
Topic Author
- Offline
- Elite Member
-
- Posts: 316
- Likes received: 144
Foot Peg Rubbers 74 360 was created by pabdt
Looking for new replacements! Hard to find.
When I measure my DT125A pegs, they look the same size. Does anyone know if the 125 and 360 rubber pegs are the same or will work? Better yet, any idea who sells the ones for the 360?
thanks.
When I measure my DT125A pegs, they look the same size. Does anyone know if the 125 and 360 rubber pegs are the same or will work? Better yet, any idea who sells the ones for the 360?
thanks.
74 DT 360 ... resto in progress.
26 Jun 2024 14:54
#1
Please Log in or Create an account to join the conversation.
- mdscott
-
- Offline
- Site Supporter
-
- Posts: 2142
- Likes received: 1414
Replied by mdscott on topic Foot Peg Rubbers 74 360
Hello, if you plan on riding offroad ditch the rubber pegs, horrible in wet conditions.. I put on 73-74 MX250-360, SC500 metal pegs. I sure you could find some aftermarket ones, but some are cheap and easily break.
Thanks Mark
Roseville, Ca.
'03 ST1300
'75 Norton
'73 CB500K
'81 Honda CT110
'87 PW50
'64 McClane Edger
'02 Honda XR70R
Roseville, Ca.
'03 ST1300
'75 Norton
'73 CB500K
'81 Honda CT110
'87 PW50
'64 McClane Edger
'02 Honda XR70R
The following user(s) Liked this Post: MarkT
26 Jun 2024 15:45
#2
Please Log in or Create an account to join the conversation.
- pabdt
-
Topic Author
- Offline
- Elite Member
-
- Posts: 316
- Likes received: 144
Replied by pabdt on topic Foot Peg Rubbers 74 360
thanks I'll give those a look over.
74 DT 360 ... resto in progress.
26 Jun 2024 16:55
#3
Please Log in or Create an account to join the conversation.
- RT325
-
- Offline
- Platinum Member
-
- Posts: 9970
- Likes received: 4116
Replied by RT325 on topic Foot Peg Rubbers 74 360
I'll confuse the issue but on my DT1 i used original rubbers motocrossing through the early years with no problem.
But anyway--part number randomly going DT125A & DT3 they look the same but number changes by the last middle number.
Both 214 numbers which to me relates to DT1. DT125a shows 214-27411-00. DT3 shows 214-27413-00--on Partzilla.
Have a happy day.
But anyway--part number randomly going DT125A & DT3 they look the same but number changes by the last middle number.
Both 214 numbers which to me relates to DT1. DT125a shows 214-27411-00. DT3 shows 214-27413-00--on Partzilla.
Have a happy day.
The following user(s) Liked this Post: pabdt
26 Jun 2024 17:25
#4
Please Log in or Create an account to join the conversation.
- MarkT
-
- Online
- Site Supporter
-
- Posts: 13713
- Likes received: 9557
Replied by MarkT on topic Foot Peg Rubbers 74 360
Partzilla shows the same footpeg rubbers fitting a lot of the 74-76 DT models...
You might try contacting Clauss Studios if you haven't already. They might be your best bet. HVC Cycle would be another place I'd check.
You might try contacting Clauss Studios if you haven't already. They might be your best bet. HVC Cycle would be another place I'd check.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: pabdt
26 Jun 2024 17:39
#5
Please Log in or Create an account to join the conversation.
- RT325
-
- Offline
- Platinum Member
-
- Posts: 9970
- Likes received: 4116
Replied by RT325 on topic Foot Peg Rubbers 74 360
Not sure if it's any help but Partzilla shows them in stock for a DT3 @$14.47. I guess that's each!!.
The following user(s) Liked this Post: pabdt
26 Jun 2024 18:49
#6
Please Log in or Create an account to join the conversation.
- pabdt
-
Topic Author
- Offline
- Elite Member
-
- Posts: 316
- Likes received: 144
Replied by pabdt on topic Foot Peg Rubbers 74 360
MarkT, thanks for the Clauss Studios reference. I ordered a pair from them. RT325, thanx for the part # analysis.
74 DT 360 ... resto in progress.
26 Jun 2024 23:24
#7
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart