facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

CT 2 and CT3 air boot

  • ay18176
  • ay18176's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 30
  • Likes received: 1

Replied by ay18176 on topic CT 2 and CT3 air boot

Thanks 
09 Nov 2022 18:39 #11

Please Log in or Create an account to join the conversation.

  • Posts: 54
  • Likes received: 36

Replied by Mark350 on topic CT 2 and CT3 air boot

An alcohol and wintergreen (3:1) mix will soften rubber and will induce some minor swelling. This mixture worked on my RT-1 carb/air cleaner rubber plenum. Wintergreen is not cheap, but for a rare part might be worth a try. At the time I could not find a plenum so this procedure made my original usable.
13 Nov 2022 19:02 #12

Please Log in or Create an account to join the conversation.

  • Posts: 482
  • Likes received: 583

Replied by SKYDANCER46 on topic CT 2 and CT3 air boot

I use a variable temp heat gun on all rubber parts and wire harness with the plastic jackets on them. softens them up nice so you can move them or install them easy. Especially in the fall and winter.
13 Nov 2022 20:23 #13

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart