facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Sprocket set up

  • Gibz
  • Gibz's Avatar Topic Author
  • Offline
  • Site Supporter
  • Site Supporter
  • Posts: 16
  • Likes received: 8

Sprocket set up was created by Gibz

Greetings

I would like to make my DT2 a bit more road worthy on the top end. Currently has a 47T in rear with a 14T in front. Really not sure how to gear this up properly to cruise at 55 max without 1st being too tall. As is, its screaming more then I would like at 50. Any suggestions on a proper set up. As I recall it takes a 520 chain size ?? Thank You!
07 May 2022 20:14 #1

Please Log in or Create an account to join the conversation.

  • Posts: 1203
  • Likes received: 786

Replied by Swoop56 on topic Sprocket set up

Your 14T front is stock size for a DT2 , but your rear is 3T larger than 44T stocker .
Try a 15 T front , as you'll quite likely get away with your current chain .
That will put you pretty close to stock gearing .
If that doesn't cut it , you might have to get a smaller rear .
The following user(s) Liked this Post: Gibz
07 May 2022 22:59 #2

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart