facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Carb ID

  • mike8162
  • mike8162's Avatar Topic Author
  • Offline
  • Site Supporter
  • Site Supporter
  • Posts: 80
  • Likes received: 82

Carb ID was created by mike8162

Hey All,
Recently bought a CT3 in decent shape. Hope to make a patina rider out it. It does need a little work though. It has a Chinese carb on it. I bought a tail light and a carb pretty cheap for it. Not sure about the carb though. Was sold as a '71 CT1 carb. I figured this had to be wrong as it has a plunger style enricher as opposed to a lever. I thought a few of the experts would have an idea weather or not I could use it with different parts inside. I have a few numbers off the body and parts
Body is 192 on the enricher side of flange and G51 on the other side
Engine side opening is 24mm
Slide is 2.0
Jet setter is 215 with 0-0 under that
Main jet 170
Pilot jet 35
Needle 4F10
Thanks in advance if this makes sense
Cheers
 
20 Sep 2021 18:28 #1

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart