facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

CT3 points.

  • ksours
  • ksours's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 122
  • Likes received: 25

CT3 points. was created by ksours

Pulled the magneto , cleaned ,replaced points and condenser. After reinstalling magneto I can not seem to get the points to open. The old points are a tad longer but when I cleaned them and reinstalled them the same thing. L
I can not even get a big enough gap to stick a feeler guage in them.  New points from Niche. Any  suggestions?
06 Sep 2021 12:35 #1

Please Log in or Create an account to join the conversation.

  • ksours
  • ksours's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 122
  • Likes received: 25

Replied by ksours on topic CT3 points.

Thought I would leave this post up. I got the points to work properly as the bottom guide post on the main assembly was not seated right. I cleaned the guide hole and reinserted then tapped and verified the points were flush and dang if it didn't work. sorry for the post but I was getting hot here in Phoenix.
The following user(s) Liked this Post: redriderjf87
06 Sep 2021 13:32 #2

Please Log in or Create an account to join the conversation.

  • Posts: 10829
  • Likes received: 4695

Replied by RT325 on topic CT3 points.

All good info. We all get things wrong once in a while, but there's great satisfaction in sorting it yourself. Keep up the good work.
The following user(s) Liked this Post: MarkT, Jack
06 Sep 2021 13:44 #3

Please Log in or Create an account to join the conversation.

  • Posts: 14515
  • Likes received: 10726

Replied by MarkT on topic CT3 points.

Nice job!
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
06 Sep 2021 14:13 #4

Please Log in or Create an account to join the conversation.

  • Posts: 20
  • Likes received: 1

Replied by redriderjf87 on topic CT3 points.

Good info, thanks.  If I don't convert to CDI, this will probably be helpful the next time I check or change mine.
1972 Yamaha CT2 175
2018 Yamaha TW200
08 Sep 2021 16:55 #5

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart