×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Help with hot Stator works
- MarkT
- Offline
- Site Supporter
- Posts: 13563
- Likes received: 9396
Replied by MarkT on topic Help with hot Stator works
I hate digital meters. Especially the "autoranging" type. They don't seem to work right on these old bikes. I prefer my old Simpson analog meter... I've never had a goofy reading with a good analog meter.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
28 Dec 2019 16:42
#11
Please Log in or Create an account to join the conversation.
- RT360Fan
- Topic Author
- Offline
- Site Supporter
- Posts: 471
- Likes received: 191
Replied by RT360Fan on topic Help with hot Stator works
I believe it Mark, those Simpson meters look the business.
28 Dec 2019 17:05
#12
Please Log in or Create an account to join the conversation.
- RT360Fan
- Topic Author
- Offline
- Site Supporter
- Posts: 471
- Likes received: 191
Replied by RT360Fan on topic Help with hot Stator works
So to close the circle on this one...
Got the stator cleaned up and installed. Passed all tests. Filled in the stator and case marks with red paint. Did the flywheel marks too. These aging eyes can use all the help they can get
Set the timing. Was spot on at the factory marks, no adjustment needed
Buttoned up and ready to rumble (hopefully)
Got the stator cleaned up and installed. Passed all tests. Filled in the stator and case marks with red paint. Did the flywheel marks too. These aging eyes can use all the help they can get
Set the timing. Was spot on at the factory marks, no adjustment needed
Buttoned up and ready to rumble (hopefully)
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13563
- Likes received: 9396
Replied by MarkT on topic Help with hot Stator works
Very nice work!!!
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
05 Jan 2020 15:03
#14
Please Log in or Create an account to join the conversation.
- RT360Fan
- Topic Author
- Offline
- Site Supporter
- Posts: 471
- Likes received: 191
Replied by RT360Fan on topic Help with hot Stator works
Thanks Mark.
After I got everything back together (wiring, carb, tank, seat) she started first kick. With the ignition no longer a question I can work on sorting the carb/jetting.
After I got everything back together (wiring, carb, tank, seat) she started first kick. With the ignition no longer a question I can work on sorting the carb/jetting.
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart