facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

Aftermarket carb for 78 DT250

  • smk8954
  • smk8954's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Likes received: 0

Aftermarket carb for 78 DT250 was created by smk8954

I recently bought a 1978 DT250 from someone that converted it to premix and disconnected the autolube but left the system in tack. The issue I ran into is that they plugged the oil inlet in the carb with a screw leaving it threaded. I am tempted to attempt to drill it out but as the original carb has been discontinued, I was wondering if anyone had a suggestion for an aftermarket carb I could replace it with should it be necessary.
15 Mar 2021 16:15 #1

Please Log in or Create an account to join the conversation.

  • Posts: 19
  • Likes received: 7

Replied by elliottles1 on topic Aftermarket carb for 78 DT250

i have had great success with the OKO, kehin copies on ebay from china, the flat slide power jet type. they are only about 25 quid and are good quality and very easy to jet. i have used 4 on different bikes including dt250 and 400, 32mm and 34mm respectively and wouldnt hesitate to use them again.

Last edit: 10 Jun 2021 12:04 by elliottles1.
10 Jun 2021 12:04 #2

Please Log in or Create an account to join the conversation.

Moderators: yamadminEnduronutMakotosunDEETVinnieDevinJames Hart