NOTICE: If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community!
I have a 1973 CT3 with no spark. Looks as if the coil has a few broken wires. My question is regarding rewiring the ignition coil on my stator plate. I’ve found the resistance specks and all other information I believe I need to get the job done but one thing I can’t find is what size magnet wire to use. I burned the insulation off of a small section and mic’d it. I believe it to be a 23.5AWG but I’ve found that this size is difficult to come by. I’m wondering if I have the correct size or if wrapping with either a 22 or 24 would be ok?